We performed a comparison between AirCheck G3 and LinkRunner based on real PeerSpot user reviews.
Find out in this report how the two Network Troubleshooting solutions compare in terms of features, pricing, service and support, easy of deployment, and ROI."AirCheck made a lot of children and caregivers quite happy. While I might not have resolved everything, I have reduced the problems that we had every night. During the day, they would do visible checks and not always rely on the monitors, but every night, they had at least three or four of those alarms. I was able to reduce it to once or twice a week since those appliances are still limited in their wireless capability."
"The airCheck is the real-time spectrum analyzer to see clients that could be connecting to our network, not just rogue networks out there, but rogue clients and other interference in that particular spectrum."
"The auto-test, channel scanner, packet capture, and Link-Live integration are all crucial features we use regularly. The wired cable tester is also indispensable. We frequently run into problems during cable testing that are hard to pin down. When tracking down a cable problem, you usually need to plug something into the cable and ensure the cable plant is reliable."
"It is portable. It is rugged. It comes with a nice case. It has been dropped, but it doesn't break. I don't have a crack screen or anything like that. It has pretty good battery life."
"The solution saves us a factor of 10 in time. If a typical WiFI ticket would cost me two hours with AirCheck, then it would cost me 20 hours without it. At 20 hours, you start to refuse to do tickets because it is just too expensive."
"The information provided by the solution for resolving connectivity and performance problems is very thorough. The reporting functionality is extremely good as I can pass that information on with little input. The device will identify issues and problems, e.g., the diagnostic material. When you have Internet access, it sends the information to your email address, which is very useful."
"The ability to push data to Link-Live is really important. On the main screen, you can see all the system parameters, and then you can also go and see all the current systems that are operating. They all have different SSIDs or system identifiers, and you can see all SSIDs that are operating in a certain area. Being able to see that and being able to dive into each one and figure out what frequency it is operating under is valuable."
"It has made our networking staff more productive. We spend less time because the device helps us by identifying the issue and providing a solution for the customer. Prior to not having this device, we would have to guess when an issue arose. Now, we don't have to guess. This can easily save us hours per call."
"I like the fact that I can tell the equipment to stop at a certain point during the test of a cable, to see whether or not there is basic connectivity. I can stop it before it starts pinging the outside world, such as Google or, perhaps, our core network switch. Those basic results—do I have a basic connection and power—finish up fast and I can move on."
"The AutoTest feature makes it easy for you on both ends. It's an excellent feature, especially if you're by yourself. You plug one end in and you hit AutoTest. It sits and waits for you to plug in the other end and it starts testing."
"It is fast in providing results. It is pretty accurate."
"It provides a way to test 10Gig connectivity. Previously, we had to hook up a switch. That was our only way. Now, with LinkRunner, we can test on the fly if an SFP is bad or if the switch has the right configuration on it."
"In terms of documenting ad hoc additions and other changes to wired ethernet connections, this product is very good. It keeps the information in the cloud and I have the ability to name it. This makes it very nice and easy to see."
"AutoTest is very helpful. It's very streamlined and it's very easy to set up and very easy to identify what we want to achieve. It's probably the feature we use the most. It provides us with LLTD, which is very useful."
"LinkRunner 10G is very handy for onsite troubleshooting and implementations. We can quickly identify the links in terms of 1G, 2.5G, 5G, and 10G on the copper side, and also from 1G up to 10G on the fiber side. It is very handy for me because we deal with a lot of banks. Especially for the provisioning of new services, we use this tool to identify the link capacity and do the necessary testing to ensure all the circuits are ready before the handover to the next team to operate the technology. This is something that saves a lot of time as compared to the old days."
"I've found the VLAN test feature to be most valuable. That's because not many devices do VLAN tests. Normally, I have to send a center technician to check a line and see if it's alive. If it's working, then I have to send a network technician out to log into a switch and see which port it's on and on which VLAN that port is. That's two persons and two separate visits. This device does all of this in a matter of seconds, and that has saved me a lot of time, troubleshooting, and resources."
"NetAlly has been behind the curve on visualization, Wi-Fi design, and heat maps for a little while now. They're perfectly aware of this deficiency, but what they offer is good enough for a lot of people. It's not suitable for larger shops, but it works in a pinch. The AirMapper and subsequent AirMagnet integration is an afterthought."
"A feature I would like to see is the ability to charge the device via a PoE outlet. Usually, I need to charge it at home. It would be good to leave the device plugged in and charging at a PoE source at the customer site after a quick look at the network when I have moved on to other tasks."
"It was hard to determine which AP was which because it only shows the MAC address. It'll also display the MAC address of the BSSID, so it looked like I had 12 APs in my house. If I have three access points and each is a dual-band with an SSID or BSSID for each radio, it comes out to about 12 APs. That's one of the bugs fixed in the latest firmware update, but it's only available if you have a NetAlly support contract."
"It would be nice if I could import an AP list with a MAC address. When it looks at access points, it should tell me the AP name instead of the MAC address. When you get a MAC address, you could eventually find out where you want to go. However, a lot of times, if I just have an AP name, I know that's in this area or that's over there. I would like that function because AirMagnet, which is the precursor of this, had that ability where you could basically import a list of APs and MAC addresses, and then it could display those instead of just a MAC address."
"The only thing that would be an improvement would be the ability to do MPO/MPT testing, which is another mode of fiber, along with more options on the SFP to do that testing."
"The battery life needs improvement. For example, when you are doing an Ethernet test, that seems to drain the battery pretty quickly."
"I would love to have a button that pretends that you're an iPhone 5 or an Android Samsung, then tell me what you think the experience is. This is a very difficult thing to do because each of these things has different radios in them and behaves differently. Now, I can go into the user's office, and say, "The tool says everything's green. The WiFI infrastructure is fine, but their iPhone experience sucks." Is it a problem with their particular iPhone or is it a problem with any iPhone model? If I could have this solution emulate an iPhone model so I can walk into that room, and say, "My tools pretending to be your iPhone and it works fine. It must be your particular iPhone that we have a problem with." I found mobile phones in general have lousy radios and the coverage isn't strong enough, but it would be a nice feature."
"The biggest improvement would be an easier upload over wireless to Link-Live. Currently, the device has to be patched into the Ethernet. The wireless upload has been giving us some issues."
"Being really nitpicky about the LinkRunner G2, I wish the form factor was a little bit smaller. However, I'm sure that the size of the unit is compromised by the fact that the battery is large. If that were to mean having less battery life, I would not change it."
"If it weren't for the battery, it would probably get an eight out of 10. But because of the battery, it's infuriating and it's not reliable."
"One of the things I'd like to see in future versions of LinkRunner is a wireless dongle embedded into the product so that I don't need to have a separate wireless dongle. It should be built into that."
"I wish they had software that could create continuous streams of traffic. I'm not sure if that's possible with LinkRunner, but it would be very helpful in some of the test case scenarios that clients are looking for, in regards to quality of service"
"They should allow firmware updates even if you don't have an AllyCare contract. I'm in a situation right now where they've released firmware for bug fixes, but we cannot access those, which makes the device almost useless. You almost want to just throw it out the window because they're not supporting their product unless you have an AllyCare contract."
"It's a bit bulky. It would be nicer if it were a little bit smaller and packed with all its features. I would also like it if the screen were a bit bigger."
"Unlike using an application like Wireshark, this device gives us no way to see network packets specifically to look at what's going on. It doesn't have the capability."
"One area where LinkRunner could be improved is the battery life. Depending on which tests are run, it gets a decent six to eight hours. However, sometimes we need to do back-to-back shifts to meet a deadline, and we need access to an outlet to keep it plugged in and charging. It takes about an hour or two to charge."
AirCheck G3 is ranked 5th in Network Troubleshooting with 13 reviews while LinkRunner is ranked 1st in Network Troubleshooting with 20 reviews. AirCheck G3 is rated 8.6, while LinkRunner is rated 8.6. The top reviewer of AirCheck G3 writes "A portable, rugged device that reduces resolution time and saves thousands of dollars". On the other hand, the top reviewer of LinkRunner writes "Single Auto-Test button gives me all the information I need on most jobs". AirCheck G3 is most compared with AirMagnet Survey, iTrinegy NE-ONE Network Emulator and NetAlly EtherScope nXG, whereas LinkRunner is most compared with NetAlly EtherScope nXG, LinkSprinter, OneTouch AT Network Assistant and IxChariot. See our AirCheck G3 vs. LinkRunner report.
See our list of best Network Troubleshooting vendors.
We monitor all Network Troubleshooting reviews to prevent fraudulent reviews and keep review quality high. We do not post reviews by company employees or direct competitors. We validate each review for authenticity via cross-reference with LinkedIn, and personal follow-up with the reviewer when necessary.
